2012 CONCRETE FLOOR Contracting opportunities

1.Easy to move 2.High efficiency 3.Automatic sand recovery 4.Widely used for airport runway,concrete road, bridge mainten

RCDS-600

 Shot blasting is a costeffective and environmentally friendly method for preparing concrete and steel surfaces. 

This labor and timesaving process strips, cleans and profiles simultaneously. It leaves the surface immediately ready for application of coatings or overlays-eliminating drying time and costly disposal procedures associated with other preparation methods. Shot blasting is the preferred method of surface preparation, recommended by most coating manufacturers. It produces excellent bondingcharacteristics that reduce coating failure and maximum floor life.

 Main Performance Characteristics for  RCDS-600 

1.Major components are imported 

2.Abrasive-casting room introduces wearr-esistant materials to guarantee the service life; 

3.wearing parts such as blasting head and oriented jacket are cast in wear-resistant materials, 

4.the service life could reach 20000m2(Notice: cement concrete pavement).

Dust collector

How it works:

Shot material in the lower part of separation box is from the feeding tube into the blasting components and driven by the motor. The high-speed rotating shot will be thrown and stroke against the surface of workpieces at the speed of 80m/s. And thus carry out clean-up operation. Under the effect of negative pressure, the shot abrasive and dust will be back into sand separation box where the shot, dust and impurities will be separated completely. Good shot materia into the blast is expected to continue to use.

Features: 

For concrete:

· Prepares concrete for recoating or application of overlays

· Removes markings, dirt and old coatings

· Prepares parking lots and garage decks

· Cleans factory and warehouse floors

· Ideal for airport runways

· Used on bridge decks and highways

For Steel surface:

· Removes paint, rust, mill scale and marine growth

· Cleans ship and aircraft carrier decks

· Removes non-skid coatings

· Cleans offshore platforms

· Prepares petroleum and water storage tank surfaces

For other surfaces:

· Cleans brick or stone

Removes paint pavement markings from asphalt surfaces

 Road surface shot blasting machine working conditions:

1, face uneven degree <20mm; stagnant water and relatively dry; slope <25 °

2, Ambient temperature: -20 °C to 60 °C; steel surface temperature is greater than the dew point of at least 3 °C

3. humidity:

 a :steel surface blast when the relative humidity is greater than 90%

b: concrete shot blasting relative humidity less than 95%

4, elevation: 0 ~ 3000m; may not be in operation in the rain and snow)

After-service they come with a one year warranty.   Of course,spare parts will be supplied when needed.We provide technical support by phone call or Coaching By Walking Around.More details ,please contact us!

	RCSS-270	RCDS-420	RCDS-550	RCDS-600	RCDS-800
Blast Motor	11KW	2*11KW	2*11KW	2*11KW	2*15KW
Voltage	380V/63A	380V/63A	380V/63A	380V/63A	380V/63A
Travel Speed	0.5-20m/min	0.5-30m/min	0.5-30m/min	0.5-30m/min	0.5-30m/min
volume of blast	up to 150m2/h on concrete	up to200m2/h on concrete	up to 300m2/h on concrete	up to 400m2/h on concrete	up to 600m2/h on concrete
Overall Dimensions	1950mm/750mm/1200mm	1950mm/760mm/1200mm	1950mm/980mm/1400mm	1950mm/1000mm/1200mm	1950mm/1200mm/1200mm
machine weight	150kg	320kg	570kg	570kg	670kg
Cleaning Path	270mm	420mm	550mm	600mm	800mm
Dust reclaiming	horizontal,self-propelled	horizontal,self-propelled	horizontal,self-propelled	horizontal,self-propelled	horizontal,self-propelled

2012 CONCRETE FLOOR Contracting opportunities